Настройка VLAN на оборудовании Cisco
May 18th, 2009
No comments
Пример настройки для следующей конфигурации:
Router (f0/0) -> Trunk -> (f0/0) Switch (f0/1) -> Vlan 10 -> PC1
(f0/2) -> Vlan 20 -> PC2Настройки PC1:
IP Address......................: 10.0.0.2 Subnet Mask.....................: 255.255.255.0 Default Gateway.................: 10.0.0.1
Настройки PC2:
IP Address......................: 10.0.1.2 Subnet Mask.....................: 255.255.255.0 Default Gateway.................: 10.0.1.1
Настройки Switch:
Switch#conf t Switch(config)#int f0/1 Switch(config-if)#switchport mode trunk Switch(config-if)#int f0/1 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 10 Switch(config-if)#int f0/2 Switch(config-if)#switchport mode access Switch(config-if)#switchport access vlan 20
Настройки Router:
Router#vlan database Router(vlan)#vlan 10 Router(vlan)#vlan 20 Router(vlan)#exit Router#conf t Router(config)#int f0/0.10 Router(config-subif)#encapsulation dot1Q 10 Router(config-subif)#ip address 10.0.0.1 255.255.255.0 Router(config)#int f0/0.20 Router(config-subif)#encapsulation dot1Q 20 Router(config-subif)#ip address 10.0.2.1 255.255.255.0 Router(config-subif)#int f0/0 Router(config-if)#no shutdown
